Browsing by Subject "Simulation methods"
Now showing items 1-19 of 19
-
(Texas A&M University. Libraries, 1980)In situ measurements and a wind tunnel experiment are used to define the degree of wind speedup in the boundary-layer flow over the top of a small mesa. Measurements of the speedup of the wind relative to that observed ...
-
(Texas A&M University. Libraries, 1988)Major advances in simulation techniques have resulted from refinements to our understanding of the modeling and analysis processes. Previous work has provided the framework for advances in the three major support technologies ...
-
(Texas A&M University. Libraries, 1992)A general framework and methodology for modeling ecological management systems was proposed, with which useful information about the system, in varied forms, could be captured and utilized. These information dimensions of ...
-
(Texas A&M University. Libraries, 1980)The presented language is used for design and prototype implementation of application graphics systems. By usual methods it is not feasible to test a system in the user environment until near completion. Incorporation of ...
-
(Texas A&M University. Libraries, 1979)This dissertation presents a general method of optimizing simulated systems and demonstrates the procedure for maximizing the single period benefits of an entrepreneur. The method is applied to the problem of maximizing ...
-
(Texas A&M University. Libraries, 1988)An experiment was conducted to ascertain whether industrial simulation software could be used to teach complex manufacturing concepts to students in manufacturing technology programs. The objectives of the study were to ...
-
(Texas A&M University. Libraries, 1981)This dissertation presents a new discrete/continuous digital simulation language. GEMS-D/C, a Generalized Manufacturing Simulator, is designed to assist system analysts investigating complex manufacturing systems with a ...
-
(Texas A&M University. Libraries, 1988)The advances in hardware have made possible the application of multiple processors to the domain of simulation. However, the use of multiple processors complicates the model development process by requiring the simulationist ...
-
(Texas A&M University. Libraries, 1987)A secondary water recovery operation was proposed in order to recover additional amounts of water stored in the unsaturated zone of depleted aquifers and currently unavailable with conventional techniques. The proposed ...
-
(Texas A&M University. Libraries, 1970)This study illustrates that a water resource system planning model can be developed which will incorporate the full effects of the risk elements inherent in the system. The system for which the model is developed is that ...
-
(Texas A&M University. Libraries, 1993)Watershed management concerns are focused on conserving land and water resources. To address such concerns, there is a need for an in-depth understanding of the complex and inherent variability of natural processes occurring ...
-
(Texas A&M University. Libraries, 1992)New enhanced oil recovery techniques, such as in situ combustion and chemical flooding, occur with the simultaneous flow of three phases (water, oil and gas) in the reservoir. Accurate estimates of three-phase relative ...
-
(Texas A&M University. Libraries, 1990)Modeling fluid flow around horizontal wellbores with conventional reservoir simulators is somewhat inefficient due to the fact that the radial flow patterns found in the vicinity of a horizontal wellbore must be simulated ...
-
(Texas A&M University. Libraries, 1983)The 14 years of daily and hourly data from three selected stations in Texas were used to determine if they could assist in predicting the Texas rice yields per planted hectare. Minimum temperature in the first stage and ...
-
(Texas A&M University. Libraries, 1976)It is well known that use of very coarse grid patterns in numerical models can lead to large errors in simulated performance. There is very little quantitative information on the relationship between grid spacing and errors. ...
-
(Texas A&M University. Libraries, 1980)This dissertation is a study of the effect of various design factors on the performance of production lines. A review of past research on production lines reveals that the majority of production line models reported in the ...
-
(Texas A&M University. Libraries, 1987)Research was conducted to formulate techniques for modeling phenological development of weed populations. Techniques which are currently used for modeling development rate of insect populations were reviewed and tested for ...
-
(Texas A&M University. Libraries, 1992)In this dissertation, we apply the linear RC delay modeling techniques to empirically model the timing delay in the CMOS VLSI circuits. The multi-dimensional function of various circuit combinations and device parameters ...
-
Variability and predictability of the surface temperature field on a zonally symmetric land planet (Texas A&M University. Libraries, 1991)An information approach to the study of climate predictability is introduced. This approach uses various information measures based on entropy to define the limits of predictability and to quantify the information given ...